1, the white stone should be protected before the glue is filled, and the transverse and vertical surfaces of the seams should be protected by saturation, and the adequate health period is guaranteed.

2, white stone can not be easily frictioning, glue glue oil easily into the white stone surface form ugly shadow.

3, try to use the white stone white pad or good soft stainless steel wire cotton crystal, if the choice of ordinary steel wire made of cotton and chemical crystallization crystallization, agents must put less grinding, land clean agent, steel wool and then fine, collect clean stone surface all potion seal, avoid later yellow ground.

4, white stone ground do not place all kinds of metal physical body, finish crystal to clean out the wire cotton debris.

5, the white stone should clean up the stains of the seams. When the slit is slit, the iron sheets of the slit pieces can not touch the seam, otherwise, there will be grey cast iron remaining on the white stones. The same phenomenon will be caused by seaming with the patch knife.

6, white stone to choose solid content high quality protective agent, can resist the marble glue curing process of high temperature oil oozing gum.

7, white stone to the high number of polishing and brushing, multiple protection, pharmacy crystallization to put less grinding, let the crystal layer stack, in order to make the ideal luminosity.

8, poor quality of dry grinding grinding white stone, the stone surface will cause white yellow, poor in the process of dry grinding and dry grinding in the temperature increased sharply, the high temperature for the binder to soften and dry grinding attachment caused by yellow on the stone surface.

9, any product painted on white stone must be tested by weathering and yellowing. Poor quality paraffin wax, brightening agent and mercerizing agent will cause white stone yellowing.

The white stone is not difficult to do, understand the white stone type, detail oriented, high-quality products and reasonable construction technology can make the ideal effect.